Porsche Key Replacement Cost
It can be frustrating to lose your Porsche key. Luckily, there are few options to consider.
One option is to buy a new key from your local Porsche dealership. However, this can be expensive. Also, you'll have to wait for the key to be delivered.
Change the ignition switch or lock cylinder
The ignition switch is an essential part of your Porsche's start/run systems. The switch can malfunction and make it difficult for your car to start, or even impossible to drive. The replacement of your Porsche key's switch or cylinder is an easy process that will save you lots of cash and hassle.
The ignition switch is on your steering column. If it's in good working order you can take it off by using a screwdriver. If it's damaged however, you'll need to have a professional mechanic replace it.
Before making this decision you must consider your budget and whether or not you are able to do the repair yourself. For instance, if you have access to a tool that can replace the switch or if you can get the replacement yourself from an auto parts store.
In most cases, the only solution to fix a damaged or worn ignition switch is to replace it. This is especially true if the vehicle's immobilizer system demands that the lock cylinder of the previous model be removed in order to work.
To get to the ignition switch, you'll have to disconnect the negative lead from the battery. It is also necessary to remove any trim or covers that could hinder access to the switch.
Once you have removed the trim panels and covers, take off any fasteners keeping them in place. Next, unscrew the locking tab from the lock cylinder with an awl or awl.
After replacing the lock cylinder you should be in a position to use your key to unlock the ignition and turn it on. You should hear a click from the switch after you've done it right.
Then, test it to ensure that it's functioning correctly. If it works then you're now ready to proceed to the actual installation.
Change the ignition switch/lock cylinder can be a fairly easy process, but it's essential to follow proper procedures. The wrong steps could cause serious problems for your Porsche's security system. It's for this reason that it's always recommended to get a professional to complete the task.
Replacing the key fob
You can use the key fob to lock, unlock, and start your Porsche with the click of a button. As with all electronic devices the battery of your key fob will eventually deplete and need to be replaced.
Replacing a Porsche key can be a complicated process and should be left to experts. Locksmiths who specialize in Porsche automobiles will be familiar with the security systems of these vehicles and will be able to give you a precise estimate for the cost of replacing your keys.
The cost of purchasing a new key is based on the year and model of your Porsche. For instance a model made in 2005 may be more expensive than one made in 2009.
It is a good idea in general, to have an extra key available since the cost of replacing a key can be quite high. This is particularly relevant for Porsche owners. These cars are extremely high-end and the key fobs that come with them are designed to meet the most stringent security standards.
If you lose your key the first step is to locate locksmiths who will cut a replacement key for you. You can also call the Porsche dealership to request the replacement key. This is an option if have the money to purchase a new key at an authorized dealer.
It is best to schedule an appointment with a locksmith who is experienced in programming and cutting keys for Porsche cars after you have found one. The process can take up to 20 minutes based on the type of key and complexity of the lock.
If the key needs to be replaced is equipped with a chip and it needs to be programmed on-site to work with your car. This is because your key has a transponder chip that is specific to your car.
There are many reasons your key could need to be reprogrammed. Some of them are:
Programming is the key
It is essential to have your key reprogrammed in the event that it stops working or if you require a new one. This will let your vehicle start again, and save you the cost of replacing the ignition switch or lockcylinder.
An auto locksmith can do this. The cost will be based on the model and year of your vehicle, however it could be less than the cost of replacing the ignition switch/lock cylinder installed.
Two basic security features are provided in the Porsche key one of which is a remote transmitter. It uses rolling codes and an immobilizer that locks it in the event that the code is not correct. The code must be reset prior to the key working properly.
There are numerous methods to get your Porsche key re-programmed. Most manufacturers make it easy to do this yourself, however some require special tools and procedures. You should also contact the local dealership to find out the process they use.
To get your key programmed, need to bring your original key and VIN number to the dealer. It's a simple procedure that usually takes about a couple of minutes.
The majority of the newer Porsche models have a chip or transponder. These chips are placed in your key and communicate with an ignition receiver. They can be non-transponder (no need to program) or transponder (needs to be programmed).
United Locksmith can provide an estimate for you think your Porsche key needs to have its programming changed. Our team will determine if the key is needed and will provide a more precise price estimate.
Another option is to get keys cut at your dealer or by an automotive locksmith. These locksmiths are more knowledgeable and have the knowledge to cut a replacement key. A duplicate key can often be made at a fraction of the cost of buying a new one at your dealership.
You can save money on your Porsche key replacement cost by finding a spare key within your home or possession. You can also contact locksmiths who specialize in Porsche automobiles to inquire whether they're able to cut your key for you.
Replacing the battery
A key is provided with every new Porsche. It lets you lock and unlock doors, and it also lets you start the engine. You might need to replace your key battery in your Porsche.
The majority of modern Porsche keys depend on an internal battery for their operation. In the process, they tend to lose power over time. This can cause issues like a warning light on the dashboard and difficulties getting your car started.
You should seek out a professional to replace your battery if it's becoming weaker or your key has stopped working altogether. The cost of replacement will differ according to the make and model of your car. However, the process will be simple and quick.
Before performing any replacement of the battery it is recommended to read the owner's instruction manual. Also, make sure to check the polarity of the battery prior to replacing it.
To get access to the battery inside your key, you'll first have to take it off. This can be done by flipping the key upside down before taking the battery out of the back.
The next step is to pull out the emergency key that is located on the back of the battery. Turn the key so that it is on its backside. Then, push the release button that is located at the bottom of the key.
After removing the emergency keys, you will be able see the black plastic circle that protects the battery. This is the part that needs to be replaced, so separate it from the other parts of the key by pulling it lightly.
Then then, use a screwdriver take the old battery out of the plastic casing. This will expose the CR2032 inside.
You should then put in the new battery and make sure it is facing in the correct direction. After replacement key for porsche cayenne G28CarKeys have replaced the battery, you can then reassemble the emergency key back into the fob.
Bring your Porsche key to the dealership for assistance if you are experiencing any issues. Our staff can tell you the issue and determine if the key should be replaced, reprogrammed, or completely replaced.